Cutting Steps Of Chiffon Fabric
Dec 28, 2022
Chiffon fabrics are particularly easy to breathe due to the latitude and longitude of the fabric, and the dyeing reduction is sufficient and the fabric feel is particularly soft. It is a fashionable fabric pursued by fashionable women. The texture of the chiffon fabric is soft, light and transparent, smooth and flexible, light and refreshing, with good breathability and suspendedness. It is very comfortable to wear on the body and very elegant.
Cutting steps of chiffon fabric:
1. First flatten chiffon fabrics, chiffon fabrics are not easy to flatten, so let's spread it first. If you want to discount the chiffon fabrics, you can use a large head needle along the side of the cloth. You do n’t need to be too dense. As long as you do n’t let the cloth side be too twisted, you can align the edges.
2. If there is a cutting case, draw a horizontal line or placing the fabric along the side of the case, so you can know if the fabric is crooked.
3. Then have there any small spray kettles at home, spray a layer of water on the chiffon fabric gently, so that chiffon fabrics are easy to flatten, but do not spray too much, otherwise it is not easy to flatten. If you want to experience, just try a few more times.
4. For water spray that is not easy to flatter, most fabrics do not need this. In addition, the upper and lower layers of cloths on the upper and lower layers are prone to alignment during the laying. Go to rush, blow the breath with your mouth, and flatten the fabric.
5. If you have the patience and you want to cut it more accurate, you will cut the layer of the cloth stall and cut the single layer. The trouble is more troublesome, but it can ensure that the fabric is not crooked. For newbies that are less experienced, do this, do so, do so To be more insured.
6. It is recommended to draw the paper samples on the paper first, and then put the paper samples on the fabric and discharge it. This is much more time -saving than you draw the sample on the chiffon fabric. For the fabric of the flower type, it is best to do this, and after the materials are discharged, it will be cut slowly after drawing, and the silk of the cloth is not easy to get crooked.
